Skip to content
CS2SENSITIVITY

How to find your perfect CS2 sensitivity

2 min read · Updated · Figures update automatically from our pro database

The quickest reliable way to find your sensitivity is the PSA method (Perfect Sensitivity Approximation): you repeatedly compare a lower and a higher value, keep the one that feels better, and the range halves each round. After seven rounds you are within a few percent of your ideal sens, and it takes about 15 minutes.

How the PSA method works

You enter your current sensitivity. The finder sets a lower bound at half of it and an upper bound at 1.5×. Each round you play briefly on the lower and the higher value and pick the one you aimed better with. The finder then moves the opposite bound to the middle of the range, so the gap halves every round.

After seven rounds the range has shrunk to under 1% of where it started, and the midpoint is your result. Because you only answer "lower or higher felt better", you avoid the trap of judging each value on its own, which is almost impossible to do consistently.

Example PSA run starting at sensitivity 2.0
RoundLowerHigherYou pickNew range
11.03.0Lower1.0 – 2.0
21.02.0Higher1.5 – 2.0
31.52.0Lower1.5 – 1.75
41.51.75Higher1.63 – 1.75
…Result ≈ 1.68

How to test each value

Use the same short drill for every value, otherwise you are comparing drills instead of sensitivities:

  • Workshop aim maps or deathmatch, 1–2 minutes per value.
  • Focus on first-shot accuracy and crosshair placement, not on spraying.
  • Include at least one quick turn of around 90° to check you can still react to a flank.
  • Set the value with the console (sensitivity 1.68) so switching is instant.
sensitivity 1.68

After you have your number

  1. Round it to two decimals and save it in your config (Settings → Keyboard/Mouse, or an autoexec).
  2. Re-check your zoom sensitivity if you AWP.
  3. Play a week on it before judging. If it still feels off, run the finder again starting from the new value: the second run usually lands within a few percent of the first.
  4. Compare it with pros using the eDPI calculator. Being outside the usual range is fine, but very high values deserve a second test.

Find your perfect CS2 sensitivity with the PSA method: step by step

  1. 1Enter your current sensitivityOpen the Sensitivity Finder and type the sensitivity you play on now.
  2. 2Test the lower and higher valuePlay 1–2 minutes of the same aim drill on each value shown.
  3. 3Pick the better oneChoose Lower Sens or Higher Sens depending on which you aimed better with. The range halves.
  4. 4Repeat for seven roundsKeep comparing until the finder shows your result.
  5. 5Save it and play a weekSet it with the console command sensitivity and give your muscle memory time to adapt.

Frequently asked questions

What is PSA sensitivity?

PSA (Perfect Sensitivity Approximation) is a method that compares a lower and a higher sensitivity repeatedly and halves the range each round until it converges on the value you aim best with.

How many rounds does the PSA method take?

Our finder uses seven rounds, which narrows the range to under 1% of where it started.

Does the PSA method work for CS2?

Yes. It works for any game because you only compare two values at a time. Start from your current CS2 sensitivity.